1 Single width Low Profile DIN rail mounting PSU for use with the DIN Rail Mounted DMX Relay Module. This power supply is capable of powering 2 DMX Relays Modules and 2 Relay Expansino Modules.
No voltage selection required, this PSU will work all over the world.
- Low 56mm Profile (Single DIN Module)
- Wide Range AC Input (Global use with no input selector switches)
- Input Voltage AC Max: 264V
- Input Voltage AC Min: 90V
- -25 to +71 oC Operation
- Convection Cooled
- UL1310 CLass II
- Class 2 Double Insulation
- No. of Outputs: 1
- Output Current Max: 830mA
- Output Power Max: 10W
- Output Voltage Nom.: 12V
- Power Supply Output Type: Fixed
- AC Input VOltage Range: 90 - 264 VAC
- Input Frequency: 47 - 63 Hz
- Inrush Current @ 115 VAC: 15A
- Inrush Current @ 230VAC: 30A
- Power Factor: Meets EN61000-3-2, EN61000-3-3
- Output Voltage Accuracy: +/- 1% of Nominal
- Line Regualtion: 1%
- Load Regulation: 1%
- Ripple and Noise (20MHz BW): 50mV
- Overcurrent Protection (Typical): 110 - 160%, fold foward under short circuit
- Overvoltage Protection: 120 - 145%
- LED Indicators: Green LED - On, Red LED - DC Output Low
- Operating Temerature: -25 to +85oC
- Temprature Coefficient: +/- 0.02%/oC
- Operating Humidity: 20 - 95% RH (non condensing)
- Withstand Voltage: Input to Output 3kVAC for 1 min.
- Cooling: Convection
- Isolation Resistance: > 100M at 25C & 70%RH, Output to Ground 500VDC
- Safety Agency Approvals: UL1310 CLass , UL508 Listed, UL60950-1, EN60950-1, CE
- Immunity: EN61000-4-2, -3, 04, 05, 06, 08, & -11
- Conducted & Radiated EMI: EN55022 class B
- Weight (Typical): 60g
- Size (WxHxD): 18 x 91 x 55.6mm