The Transistorised DIN Relay Module is a 4 width module and clips to a standard DIN mount rail, for example in a consumer unit.
It can be used either as an expansion module for our DIN mounted DMX Relay, or as a standalone transistorised relay pack for integration into your own projects.
Each of the 4 built in relays is capable of switching 250VAC @ 16A.
Please note this relay coil contains a Back EMF Diode so polarity of wiring to the DMX Controller is important. +12 should be connected to +12VDC, and C1-4 connected to the switched output of the DMX Relay Module.
To use this relay module as a transistor switching relay, you should connect 12VDC to the +12 terminal, 0V to the 0V terminal and then use the Transistor 1 - 4 Terminals for a +3 to +12VDC trigger input.
- Transistor switching, or direct connection to DMX Relay as expansion module.
- Simple screw terminal connections
- DIN Rail mountable (4 Modules wide)
Power Requirements
- 12VDC
- 200mA
Relay Contacts
- Contact arragement: 1 form A (NO)
- Rated Voltage: 250VAC
- Max Switching Voltage: 400VAC
- Rated Current: 16A
- Limiting making current
- Max 4s duty factor 10%: 25A
- Max 20ms (incandescent lamp) 120A
- Breaking capacity (max): 400VA
- Contact Material: AgSnO
- Operate / Release time (max): 14 / 12ms
- Bounce time (max): 5/7ms
- IEC61810 (16A, 250VAC, Resistive load, 70oC): 50x103
- Mechanical endurance: >20x106